Forward missed calls on Mint Mobile
Mint Mobile runs on T-Mobile's network and uses the standard GSM forwarding codes. One code registers busy, no-answer and unreachable forwarding at once — so only the calls you miss reach SignalRevive, and answered calls ring through untouched.
Set up conditional forwarding on Mint Mobile
Takes under a minute. Conditional means only the calls you miss get forwarded — the ones you answer ring through exactly like today.
- 01
Get your SignalRevive number
After you sign up, SignalRevive texts you a dedicated number in your area code and the exact forwarding code with that number already filled in. Have it handy — it replaces the placeholder in the code below.
- 02
Open your phone's dialer
Use the same phone and line you want missed calls forwarded from. You're going to dial a short code, not a phone number.
- 03
Dial **004*<your SignalRevive number>#
Enter the code exactly as shown — with your SignalRevive number in place of the placeholder — and press call. This turns on conditional forwarding for Mint Mobile: busy and unanswered calls only.
- 04
Confirm and test it
You'll hear a confirmation tone or see a confirmation message. To be sure, call your business line from another phone and let it ring out — you should get the SignalRevive text back within seconds. To turn forwarding off later, dial ##004#.
Mint Mobile call-forwarding codes
GSM MMI codes (T-Mobile network). Use the recommended combined code unless you specifically want to forward on only some conditions.
| When to forward | Dial |
|---|---|
| All conditions — busy, no answer, unreachable (recommended) | **004*<your SignalRevive number># |
| No answer only | **61*<your SignalRevive number># |
| Busy only | **67*<your SignalRevive number># |
| Unreachable / off only | **62*<your SignalRevive number># |
| Turn all conditional forwarding off | ##004# |
- · Type the whole string — including the ** at the start and # at the end — into your dialer, then press call. You'll see a confirmation when it registers.
- · **004* sets all three conditions at once, which is what most owners want. Use the individual **61 / **67 / **62 codes only if you want to forward on some conditions but not others.
- · Because Mint is a T-Mobile network MVNO, these are the same GSM codes T-Mobile uses. Don't use **21* (forward all) — it forwards calls you'd otherwise answer.
- · If a code won't register on a Mint eSIM/prepaid plan, Mint support can enable conditional forwarding on the account.
Forwarding missed calls on Mint Mobile — FAQ
What is the call forwarding code for Mint Mobile?+
Dial **004* then your SignalRevive number then # and press call to forward all missed-call conditions at once; dial ##004# to turn it off. Mint runs on T-Mobile's network, so these standard GSM codes apply — answered calls connect normally and only missed calls route to SignalRevive.
Will this forward calls I actually answer?+
No. These are conditional forwarding codes — busy and no-answer only. A call you pick up rings and connects like always; only the calls you don't answer roll over to your SignalRevive line and get an instant text back. Never use the plain "forward all calls" code (*72 / *21) for this.
How do I turn call forwarding off?+
Dial your carrier's deactivation code (shown above) from the forwarding phone and press call. Forwarding stops immediately and every call rings your handset again. If you cancel SignalRevive, disable forwarding too so calls don't route to a released number.
Do I need to change my phone number?+
No. You keep your existing business number and publish it exactly as before. Forwarding just hands off the calls you miss to SignalRevive behind the scenes — customers only ever see and dial your real number.
The code isn't working — what now?+
Codes vary slightly by plan and region. Call your carrier's support line and ask them to enable "conditional call forwarding (busy and no answer)" to your SignalRevive number — a rep can set it in about a minute. Business/PBX lines may need it configured on the account instead of via a dial code.
Your number's ready when you are.
Self-serve setup takes about 5 minutes. Your number is live the moment payment clears — no contracts, cancel anytime.